Ten Motorcycle Helmet Care Tips

Ten Motorcycle Helmet Care Tips on MOTORESS

Ten Motorcycle Helmet Care Tips – Use a Wet Paper Towel To Pre-Soften Those Sticky Bugs.

A rider’s motorcycle helmet is our most important piece of motorcycle gear and an essential tool to rider comfort and of course, protection in the case of  mishap. And a good quality motorcycle helmet can be a bit of an investment – quality does not come cheap when it comes to motorcycle helmets. This might surprise to know that your motorcycle helmet is more fragile than you think. Taking care of your helmet and keeping it in tip-top shape will not only help protect you to the best of the helmet’s ability, but help extend the life of your helmet.

Here are our top ten motorcycle helmet care tips!

  1. Fragile Handle with Care. Treat your helmet as if it’s fragile. Dropping a motorcycle helmet from waist height could cause damage, even if it’s not visible. Your helmet has been designed to disperse an impact through the entire helmet design. Each impact or drop as you might imagine, lessons and weakens this competence.
  2. Use That Clothe Helmet Bag Wherever You Go. Take the draw-string cover that came with your helmet with you when you ride. This can be placed around your helmet when off bike. It will protect against bumping up against doors, walls or donut counters.
  3. Don’t hang Your Helmet On Your Mirrors. And this goes for any post, or any other convenient object. Not only can a wind gust lift your helmet and send it flying to the ground this is another sure-fire way to damage the inner lining.
  4. Say No To Stickers. Some thermoplastic or polycarbonate motorcycle helmets can be damaged by the glue. A smooth surface, you might not realize is important to a helmet and your safety. You want the surface not to grip on the ground in the case of a slide or impact.
  5. Just Water to Clean Your Helmet. To clean your helmet make sure you only use pure water. If you really feel you need to use a substance, use mild soap or a “made for helmet” cleaner. The average cleaning products can damage the helmet’s protective coating and/or graphics which again effect helmet deterioration.
  6. Soften Up The Bugs. To get rid of bugs on your visor, try spreading a wet towel or tissue paper over it for ten minutes and you’ll find they come off easily (see photo above).
  7. Avoid Furniture Polish For Cleaning Your Helmet or Visor. This was a common practise in the early days when proper helmet polishing products were available. But most furniture polishes (i.e. Pledge) contain petrochemicals which are harmful to plastic as well as to polycarbonate helmets.
  8. Keep Away From Fuel. Avoid storing your helmet near fuel, cleaning fluids or excessive heat. All of these can damage materials in the helmet used during its construction.
  9. Store Your Gloves Somewhere Else. Don’t store your motorcycle gloves in your helmet when you’re off bike. Your gloves are likely to have traces of gasoline on them which can ruin your helmet’s interior. And if you have any Velcro fastenings on your gloves, these tend to stick to your helmet lining and cause pulls / damage to the lining.
  10. Five Year Refresh. Most good helmet manufacturers recommend changing your helmet at least every five years. And if it is dropped heavily or survived a crash (often in racing) replace it immediately.

 

Save

4 Comments so far

Jump into a conversation
  1. MOTORESS
    #1 MOTORESS 22 March, 2017, 12:17

    LehQ – this is possible but does depend on what helmet you have. Most ARAI and Schuberth inside pads are removable. If this is the case with your helmet, remove and hand wash in warm water with a totally detergent (mild) washing substance. Something you might wash a baby’s clothing in. Let dry and re-attach. If yours are not removable, soak a clean cloth in warm sudsy (use even a sensitive skin shower gel) water – dab and moisten inside pads. Then rinse your washing clothe with plain water and repeat/rinse. After this, take a clean dry (bath towel works well) and stuff it inside the helmet until the helmet is packed solid with towel. The towel will soak up excess moisture. Remove towel and let stand until dry (24hrs+). Stay away from an spray disinfectants (Lysol, Febreze, etc.) and chemicals of any kind. These break down and deteriorate the pads and inner compounds which you so need to perform for you in the case of mishap. Cheers!

  2. MOTORESS
    #2 MOTORESS 22 March, 2017, 12:03

    Hi Charlie-BRM. Thanks for weighing in.
    We believe in really avoiding any cleaners – water works well.
    Regarding your tip on “squirt a few drops of the hand soap from wall dispenser”.. we can’t agree with you here. Like your point, earlier, these soaps contain hyper-drying ingredients, like ammonium lauryl sulfate – these like your helmet visor, are also hard on your skin (make your skin brittle and prone to cracking).
    Good ole’ plain water.
    We’ll have a look at adding dates.

  3. Charlie-brm
    #3 Charlie-brm 17 March, 2017, 19:12

    Could you turn on the website’s option to display the date the article was posted? Then we know if we are about to comment on a current story.

    As for cleaners, absolutely avoid anything with even the suspicion of containing ammonia. What it does is it breaks down the integrity of plastics over time, but leaves them looking clean and new.

    However, when the plastic actually gets stressed, maybe months or years in the future, it will break away, offering no resistance. I’ve seen it and it’s pretty scary to observe.

    On the road, I’ll wet some paper towels at a rest stop washroom and on one, squirt a few drops of the hand soap from the wall dispenser. Use the rest to wipe down the helmet and visor.

  4. LehQ
    #4 LehQ 15 March, 2017, 12:09

    I need to clean the inside cushions, they stink! Lol any tips? would be appreciated

Your data will be safe!Your e-mail address will not be published. Also other data will not be shared with third person.